Click a Tab below and see Exactly what you get and learn why Denby Energy is the #1 choice.

[tab name='Blower Door']

Blower Door

a.k.a. Door Fan

A Denby Energy “Best Choice”

Retrotec Model Q46 Automated Blower-Door
Quality and Accuracy with Automatic Pressure & Flow Control

	The Q46 is a commercial quality automated blower-door. Use for super tight to super leaky houses, small commercial building or enclosures with 9 square ft of leakage or less. You get everything you need in 1 package Retrorec Model Q46 consists of: 1. a DM-2 2. a 2200 Fan 3. a cloth door panel Many fan case options to choose from.

DM-2A Automatic Micro-manometer		*Controls pressure or flow* Results without a computer - Flow at any pressure, CFM50 - Air-changes per hour - Leakage area, ELA - Air-flow / area
2200 Automatic Calibrated Fan		- Computer Controller built in. - 7 calibrated flow ranges for leakage measurement of super tight to super leaky buildings. - Available in 110 and 240 volts. - Strongest dan housing available.
2200 Automatic Calibrated Fan		- Extruded Aluminum Frame - Nylon Cloth - Velcro Tabs - Rubber Gaskets - Built for the 2200 Fan
Various Case Options

All inclusive Blower Door Package

[/tab]
[tab name='CO & Gas Leak']

Carbon Monoxide Monitor

A Denby Energy “Best Choice”

Testo 317 3 Carbon Monoxide Monitor
Quality and Accuracy

The Testo 317 3 CO monitor detects the presence of carbon monoxide in ambient air and warns the user both visually and audibly about dangerous carbon monoxide concentrations during furnace and boiler service and maintenance, weatherization audits or home inspections. * 3 years warranty on CO cell * No initialization phase for immediate operation * Adjustable alarm threshold * CO zeroing at site * Visual and audible alarm

Gas Leak Detector

Testo 316 1 Gas Leak Detector
Accurate, Reliable and Easy to use

Market leader in quality an reliability Safety when installing and servicing gas fired systems is a top priority of the Testo 316 1 Protection from risk of explosion Gas pipes can leak with a risk of explosion. The Testo 316 1 gas leak detector quickly detects even the smallest leaks. The optical and audible alarms signal when dangerous concentration are located. Practical and robust The Testo 316 1 is light and practical, and by using the large dial you can adapt the sensitivity of the detector to the conditions on location. The bendable measurement probe facilitates measurements at inaccessible points, and the optional TopSafe case protects the detector from dirt and impact. 316 1 Features: Bendable measurement probe for inaccessible pipes Visual and audible alarm if limit value is exceeded TopSafe case protects from dirt and impact (optional) Battery Quick reaction time Small diameter sensor head

[/tab]
[tab name='Combustion']

Combustion Analyzer

A Denby Energy “Best Choice”

Bacharach 24-8250 Fyrite Insight Combustion Analyzer
Quality and Accuracy
Protect your client and their home by analyzing the combustion gases from ovens to furnaces. Discover dangerous “back-draft” conditions and determine if the combustion unit is working properly.
With “back-draft” conditions you are dealing with a potential killer – carbon monoxide. Use a name you can trust. The Bacharach is industry leading technology.
This 5-in-1 steady state combustion analyzer comes with a flue gas CO tester, a room air CO test instrument, dual-channel digital thermometer (up to 999 degress Fahrenheit), and a digital manometer that measures gas pressure, draft, ESP, and up to +/- 100 INWC.
The Insight is capable of providing up to 100 records, and can also display measurement results for up to 8 different fuels on the backlit, custom readout graphic LCD display. Additionally, specific information can also be uploaded to a PC or printed version using an infrared printer.
Bacharach’s unique smart sensor exchange program will deliver new B-Smart Sensors directly to the user. The “pop out and pop in” replacement of the sensor allows self calibration with no guess or gas work required, providing the easiest and quickest calibration options to date.

[/tab]
[tab name='Duct Blower']

Duct Blower

A Denby Energy “Best Choice”

Retrotec Model Q32 Digital Duct Testing Air Duct Blower System
Industry Leading Quality and Accuracy

	Automated Duct Testing without a computer… for measuring duct leakage in residential & light commercial buiildings. Retrotec Model Q32 consists of: 1. a Duct-Tester Module 2. a DM-2A Digital gauge 3. and a 12 foot flex-duct with flanges for mounting on the return register. Case for DM-2A and grill mask dispenser not included.
DM-2A adjusts speed and measures duct leakage automatically

Click on the desired test pressure and walk away; the DM-2A will run the test for you.

The Retrotec Duct-Tester is designed specifically to measure residental duct leakage. It can then be used to locate duct leaks and to measure the results of duct sealing. Use the Model Q32 Duct-Tester to verify duct leakage for compliance with codes such as Title 24 in California. The typical 5 Ton air-conditioning system must have 120 cfm of leakage or less to pass California standards. The Q32 will easily test any residential system because it will create 600 cfm which is 5 times more than that.

Operation
The Duct-Tester will pressurize or depressurize a duct system (with the air handler off) from the main return grille (or blower access opening). The rest of the register openings are taped shut. Duct pressure is measured by static probes in the supply ducts. Airflow is determined by reading flow directly from the DM-2. No computer is required. Setup, taping the registers and getting results takes less than 20 minutes in most homes. The Duct-Tester can also be used in conjunction with a blower door to neutralize ducts leaks to indoors to that only duct leakage to outdoors is measured.
[/tab]
[tab name='Air Hood']

Air Flow Capture Hood

A Denby Energy “Best Choice”

TSI 8371 AccuBalance Balometer Air Flow Capture Hood
Premier Quality, Superior Results

The TSI Model 8371 AccuBalance Capture Hood is a electronic multipurpose air balancing instrument for measuring the volume of air flow at diffusers and grills. It is ideally suited for facilities managers, health and safety specialists, test engineers, test and balance professionals, and commissioning agents. This ergonomically designed, ultra light weight kit saves you time and money while helping to create an energy efficient and healthy environment. Simply hold the AccuBalance up to a diffuser or grille and read direct supply or exhaust on the large digital display. 8371 AccuBalance Features * Variable time constant modes minimize display variations measuring fluctuating flows * K factor function enables flexibility for measuring a variety of diffusers * Variety of hood sizes lets you take readings from most diffusers, registers or grilles * Back lit display is easy to read in poor lighting conditions * Sample and hold function to display one sample’s reading * Automatic conversion between actual and standard flows * Field calibration adjustment * Variable time constant * Multiple hood sizes available Includes: * 8371 AccuBalance Capture Hood * Base * Battery holder * 4 C size batteries * Battery compartment cover * Carrying case * Operation and service manual * NIST calibratrion certificate * 2 x 2 foot hood and frame hardware

[/tab]
[tab name='IR Camera']

Infrared Thermal Imager

A Denby Energy “Best Choice”

Fluke TiR IR Infrared Thermal Imager
Industry Leading Technology, Quality and Precision

The Fluke TiR Thermal Imaging cameras are the perfect imagers for energy audits. building envelope, restoration and remediation, inspection and roofing applications. IR-Fusion Technology See things both ways – infrared and visual (visible light) images fused together communicating critical information faster and easier – traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on TiR models.

Fluke TiR Building Envelope Thermal Imager/ Imaging Camera Specifications
* Includes IR-Fusion Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems
* Rugged and reliable : Engineered to withstand a 2 m (6.5 ft) drop
* 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
* Temperature range and thermal sensitivity optimized for building diagnostics applications
* Perfect for any application and budget
* Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
* Adjustable hand strap for left- or right-handed users
* Manufactured in the U.S.A.

Learn To Use All Of It!

Thermal Imaging webinars available on regular schedule, so you can take full advantage of your purchase.

[/tab]
[end_tabset]

Get the Best Tools at the Best Price

Take advantage of our 3 most popular kits
all kits have the essentials to do a BPI level audit